China Butterfly valve manufacturer,factory and supplier-Butterfly valve

contact us


Address: NO.720, Suide Road, Jiading District,Shanghai, China.
Ball valve manufacturer   

Double offset butterfly valve manufacturer

  • Port size:2″ to 48″,DN50-DN1200
  • Pressure:PN10-40 bar,150LB-300LB
  • Structure:Double offset
  • Medium:Water,air,etc.
  • Temperature :-29~120℃
  • Body material:Cast iron,ductile iron,carbon steel,stainless steel,etc.
  • Connection:Flanged,wafer or lugged end
  • Feature:China double offset butterfly valve manufacturer
China double offset butterfly valve manufacturer, factory and supplier. Double offset butterfly valve provides a simple, lightweight, compact and cost-effective structure with a low operating torque benefit. High-performance butterfly valves uses a disk offset from the center of its seat, due to which it is named as Double Offset butterfly valve. In this setting, the disk is eccentric or offset from the seat of the valve. When the disk begins to rotate, it shifts away from the seat instead of around it. In fact, this design utilizes line pressure to help give it a proper sealing. This functionality allows the usage of double offset butterfly valve in high-pressure systems such as ethanol or HVAC. PTFE or plastic are used commonly as a seat material in double offset butterfly valve, but metal seats are also provided to meet fire-testing requirements such as API 607.

Double offset butterfly valve specification
TYPE: Double eccentric, Wafer, Lug, Double flange, Welded
MEDIUM: Air, Inert Gas, Oil, Seawater, Waste water, Water
MATERIALS: Cast Iron / Ductile Iron/ Carbon Steel / Stainless
Steel / Alu Bronze
PRESSURE RATING: PN10/16, Class 150/300
TEMPERATURE: -30°C to 200°C
SEAT/LINING: Replaceable / Bonded /vulcanized Liner

Double offset butterfly valve introduction

Double offset butterfly valve has a two-offset disk which can be used up to 1,480 psi [10 MPa]. Compared to the single-eccentric design, the double offset butterfly valve uses a stem which is present behind the disk. In the high-performance butterfly valve, the second offset stem is pushed back to one side from the middle of the disk. This offset geometry allows the disk to be rubbed over the seat with just 1° to 3° of 90° rotation.

The action of the double offset butterfly valve refers to the cone profile while sealing the valve. The configuration of the disk and shaft offsets produces the cam action of the disk in the seat, minimizing the torque required to operate the valve.

Double offset butterfly valve feature
1.The double offset butterfly valve has two offsets at the center that produce cam action at the time of the application process.Triple eccentric butterfly valve has three different offset valves. Two offsets are located at the center whereas the third is on the seat surface which creates the shape of the disk and seat form of the cone.
2.The double offset butterfly valve can be used for an application of up to 325°C and can be used in pressure as high as 50 bars. While a Triple eccentric butterfly valve can be used for a demanding & long-term application of up to 932°F (500°C) and the valve is designed to withstand a high pressure of up to 725 psi (50 bar).
3.Double offset butterfly valve seat is made up of soft material while in triple offset butterfly valve seat is made of hard metal.
4.One of the key distinctions between the two butterfly valves is their appearance. In the double offset butterfly valve, the two offsets of this type of valve allow easy opening and retain their strong sealing strength.

Double offset butterfly valve classification

Based on the connection there are four main types of high performance or double offset butterfly valve.
Wafer Type: The wafer type of the double offset butterfly valve is constructed to provide a strong sealing, safeguard against bi-directional pressure differentials, and to prevent any backflow in devices that were built for unidirectional flow. This is done by the use of a tightly fitted seal material, such as an O-ring, gasket, precisely machined, along with a smooth valve face on the downstream and upstream parts of the valve.

Lug Type: In the lug body type of the double offset butterfly valve configuration one end of the pipeline can be removed without impacting the other side of the valve. This can be achieved with threaded inserts, flanges, and two sets of lugs (bolts) that do not use nuts so each flange has its bolts. In a Lug type connection, you do not have to shut down the whole device to inspect, clean, repair, or replace the lug butterfly valve.

Flanged End Type: The flanged end type double offset butterfly valve uses a flange at both ends of the valve to be attached with pipe flanges. This type of end connection is used for the very large size of the butterfly valve.

Welded End Type: The welded end type double offset butterfly valve is used where the system is under very high pressure. These types are generally used for small size butterfly valves.

China butterfly valve manufacturer, china butterfly valve factory, china butterfly valve supplier for pneumatic butterfly valve,electric butterfly valve, flanged butterfly valve,wafer butterfly valve,lug butterfly valve,concentric butterfly valve, double eccentric butterfly valve, triple eccentric butterfly valve,double offset butterfly valve, triple offset butterfly valve, rubber lined butterfly valve, PTFE FEP PFA lined butterfly.